Horizontal sliding wall SF 55 H-S-W

Home Horizontal sliding wall SF 55 H-S-W

About Your System

Profile Systems

Technical hardware

Features

Profile Systems

Horizontally sliding wall with aluminum insulation.
Suspended structure with single sliding doors
Optionally with paneling with rear ventilation inside (SF55c)
The mounting depth of the profiles is 55 mm (SF55c = 75 mm)
The leaves can be opened and optionally park inland, abroad or in the center
You can open inward, outward or in the center
Optionally, you can open to one side or both sides
Optionally with perimeter frame
Heights can be compensated after assembly

Technical hardware

All components of the fittings are concealed in the profiles
Components of small, stainless and easy to use hardware with maintenance
The leaf locking takes place with a distance of approx. 22 mm at the bottom
The locking and unlocking of the leaves is via flat handles with locking anti-theft device
The leaves can be further protected with a profile cylinder lock
You can integrate a door step in a sheet carrying a button, lock and profile cylinder

Features

Each element is coupled to two rolling mechanisms in the slideway on top
Rollers with low noise, wear-resistant, heat and cold
Running gear can be moved at any angle between 90and 180
In the vertical edge of the sheet tightness rainwater and wind it is guaranteed by two levels EPDM waterproofing
Horizontally at the bottom weatherstripping brush double soul install with flexible PVC
Crystals can be mounted 8mm to 36 mm
You can easily change the crystals post
You can easily change leaves post