Turning and sliding system SF 35

Home Turning and sliding system SF 35

System information

Profile systems

Essays

Technical hardware

More features

Download

Profile systems

Rotating frame Sliding System
Aluminum profiles without thermal insulation with insulating glazing
Sound insulation Rw value of 30 dB according to DIN EN ISO 140-3
Optionally with lower storey tract or embedded therein
The floor rail can be used to “households without barriers” in accordance with DIN 18 025.
Optionally, you can open inwards or outwards
Optionally, you can open to one side or both sides
Optionally with or without side frames
Height tolerances can be compensated with a profile height compensation

Essays

Sound insulation to Rw = 30 dB according to DIN EN ISO 10140-3
Measuring bending, class 3 to DIN EN 12211/12210 (glass 20 mm (4/12/4))
Pressure / suction repeated, class 3 to DIN EN 12211/12210 (glass 20 mm (4/12/4))
Safety test, class 3 to DIN EN 12211/12210 (glass 20 mm (4/12/4))

Technical hardware

All components of the fittings are concealed in the profiles
Components of small, stainless and easy to use hardware with maintenance
Lockable from the inside and / or from outside
Locking and unlocking is performed with a flat knob easy handling
The rotating blade can be protected against unintentional opening by a lock with profile cylinder.

More features

The bogies (maintenance) are mounted at the top with two rollers for each carriage
Each running gear comprises three bearing easy sliding needle rollers and two fiber reinforced carbon
All metal components of the running gear are made of stainless steel
Sliding surfaces with low noise, wear-resistant, heat and cold
Running gear can be moved at any angle between 90and 180
Male-female system between sheets
Horizontally across the top and bottom brush weatherstripping installed inside and outside
The lower and upper seal brush is attached to the frame of the leaf and not to guides
Possibility of insulating glazing of 18 or 20 mm
You can easily change the sheets afterwards.
Drainage without pressure due to installation inferior oblique
Water capture channel integrated in the inside of the floor rail (optional)
Waterproofing side rail floor with end covers