Turning and sliding system SF 25

Home Turning and sliding system SF 25

About Your System

Profile system

Checks

Tecnica fittings

Breaking mechanism

Download

Profile system

Rotating fully glazed sliding system
The resistance is 3900 Pa (ESG-H, 10 mm)
Sound insulation Rw value of 22 dB according to DIN EN ISO 140-3
Sound insulation Rw value of 34 dB according to DIN EN ISO 140-3 with transparent board
Optionally with lower storey tract or embedded therein
The floor rail can be used to “households without barriers” in accordance with DIN 18 025
Optionally, you can open inwards or outwards
Optionally, you can open to one side or both sides
Optionally with or without side frames
Height tolerances can be compensated with a profile height compensation

Checks

Sound insulation to Rw = 22 dB according to DIN EN ISO 10140-3
Sound insulation to Rw = 34 dB according to DIN EN ISO 10140-3 (with seal)
Measuring bending, class 3 according to DIN EN 12211/12210 (glass 8, 10 mm)
Pressure / suction repeated, class 3 to DIN EN 12211/12210 (glass 8, 10 mm)
Safety test, class 3 to DIN EN 12211/12210 (glass 8, 10 mm)

Tecnica fittings

All components of the fittings are concealed in the profiles
Components of small, stainless and easy to use hardware with maintenance
Possibility of locking and unlocking from the inside and / or from outside
Optionally locking or unlocking with rotary knob or handle
Optionally with lock (“child protection”)

Breaking mechanism

The bogies (maintenance) are mounted at the top with two rollers for each carriage
Each running gear comprises three bearing easy sliding needle rollers and two fiber reinforced carbon
All metal components of the running gear are made of stainless steel
Sliding surfaces with low noise, wear-resistant, heat and cold
Running gear can be moved at any angle between 90and 180