Horizontal sliding wall SF 40 H-S-W

Home Horizontal sliding wall SF 40 H-S-W

About Your System

Profile systems

Technical hardware

Feautures

Download

Profile systems

Sliding glass wall completely horizontal.

Suspended structure with single sliding doors.

You can open inward, outward or center.

Optionally, you can open to one side or both sides.

Optionally with perimeter frame.

Heights can be compensated after assembly.

Technical hardware

All components of the fittings are concealed in the profiles.
Hardware components with small, stainless and user maintenance.
The elements are locked with a latch on the lower leaf profile.
You can integrate a door step in a sheet carrying a button, lock and profile cylinder.

Feautures

Each element is coupled to two rolling mechanisms in the slideway at the top.
Rollers with low noise, wear-resistant, heat and cold
Running gear can be moved at any angle between 90 ° and 180 °.
In the vertical area between sheets separation it is approx. 3 mm.
The separation can be closed using transparent flexible joints.
Horizontally across the top and bottom brush weatherstripping installed inside and outside.
The brush seal is attached top and bottom leaf profile and not the guidelines.
Safety glass tempered glass (ESG) 8 mm, 10 mm or 12 mm.
Glass retaining through a hidden system in the upper and lower sheets bolted profiles.
You can easily change the windows afterwards.
You can easily change the sheets afterwards.